Text Box: Bryan Swenson is a Landscape Designer with a Landscape Architecture Degree from Texas A&M University. I have a passion for beautiful and sustainable landscapes that are low maintenance and contain native and naturalized plants for the Lone Star State. I love Texas and I love Texas plants, let me show you why. I offer landscape design services to all of Texas either in person or via the internet. Please help me by passing this newsletter on to a friend that might be interested. Thanks, and Happy Gardening! Bryan Swenson Text Box: 3900 FM 543 McKinney, TX 75071 Text Box: Bryan Swenson Landscape Design Services Text Box: Materials: Flagstone 1.25” minimum thickness. (20’ Path requires 1000 to 1500 lbs Masonry or play sand (20’ Path requires about 200 lbs of bagged sand, or less than 1/4 yard in bulk.) Materials available at: JBS Express Stone in McKinney on HWY 380 Text Box: Text Box: Phone214 733 6308 E-mail: bswenson@wildblue.net Text Box: 5. Place the stone in the cut out area. I recommend digging out so that the stone sits about 1 inch below the soil line. 6. Remove the stone and put 1” of and in the cut out area, then re place the stone on top of the sand. 7. The installed stone should sit at or just above the soil line. You want the mower to pass over the stone without any interference. Below is a list of the tools and materials needed to complete this project: Tools: Sharp Shooter shovel Wheelbarrow Gloves Hammer (if you want to break stones) Text Box: Flagstone Path in Lawn (continued) Text Box: Native Texas Landscapes help to save our lakes!

Move stone and excavate area beneath.

Sand the excavated area.

Install stone and level flush with soil.

Backfill area around stone with sand.

Go to: p1  p2  p3  p4